Anti-slip
Product information
Anti-slip
Applications
Anti-slip
Online quotation form
Anti-slip
Installation guidelines
Case Study
|
| |
| Anti-slip Installation Guideline
|
| |
Slip resistant flooring for ramps, stair treads,
walkways, platforms, bridges & decking
The panels can be installed in any weather
and can be used immediately after installation.
They must always be fully supported. We recommend
the following fixings: |
 |
 |
|
| |
 |
| |
Timber Fixing
Use four nails per unit 600mm long. nail should
ideally be as close as possible to the edge
ensuring they penetrate into sound timber.
Alternatively stainless steel screws can be
used for greater security.
|
|
 |
|
| |
|
| |
Concrete Fixing
Panels should be predrilled & countersunk
to accomodate zincplated or stainless steel
anchors. Holes should be 1 mm larger then
the screw diameter to allow for movement.
|
|
 |
|
| |
|
| |
Open Mesh Fixing
Stainless steel or zinc plated Saddle Clips
& domed headed bolts suitable in length
for the depth of the existing mesh.
|
|
 |
|
| |
|
| |
Steel Plate Fixing
Use No 8x20mm Self Tapping pan pozi stainless
steel or Philips zinc plated screws.
|
|
 |
|
| |
|
| |
| Alternatively,
Anti-slip can be glued to sound clean dry surfaces,
using a suitable high strength gap-filling adhesive. |
| |
