Moduflex:

• Will not rot, rust or corrode
• Is maintenance free, Moduflex needs no painting or sealing
• Easy to clean, Moduflex can be jet washed... over and over again
• Is impact resistant and robust, vermin are unable to penetrate its surface
• Lightweight, easily installed with conventional carpenters tools
  

Moduflex panels are self-coloured in white or graphite.

They can be supplied in standard sheets 2440x1220mm or 3050x1220mm or cut to your exact sizes.

For skirting we recommend the 5-6mm thickness, for low impact areas or for bonded panels a 3-4mm thickness is available.

Fixing
Fixings are placed at a maximum 300mm centres along each stud.
Studs should be at maximum 400mm centres.

Panel Joints
Panels joints may be left open or covered with cover strips or by use for proprietary plastic extrusions.

Cutting
Suitable circular saws, with appropriate blades can be employed ensuring that there is either dust extraction equipment or sawing is carried out in a well-ventilated area.
Hacksaws are convenient for small notches, trimmings or openings.

Site Work and handling
Moduflex should be handled and stored with reasonable care on site.
The panels should be sorted away from the direct influence of the weather on smooth, level ground pallets under cover and away from roadways, paths and direct foot traffic.

Temporary stacking on timber bearers spaced at 400m centres should be no more than 900mm high.